|
Change by ubTools Support - 13/May/11 05:27 PM
|
| Field |
Original Value |
New Value |
|
Description
|
+The customer encountered the following errors:+
{noformat}
./cluvfy stage -pre crsinst -n detrac1,detrac2 -verbose
.....
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) failed
{noformat}
+NTP:+
_The customer data removed._
{noformat}
# ntpq -p
remote refid st t when poll reach delay offset disp
==============================================================================
* <REMOVED> LOCAL(0) <REMOVED>
#
{noformat}
Same on the both nodes.
+CVU log:+
{noformat}
[978@detrac1] [main] [ 2011-05-13 17:09:51.490 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac1 is =
remote refid st t when poll reach delay offset disp
==============================================================================
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac1 did NOT produce valid output.
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac2 is =
remote refid st t when poll reach delay offset disp
==============================================================================
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.493 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.494 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac2 did NOT produce valid output.
{noformat}
Ref: $CVU_HOME/cv/log/cvutrace.log.0
|
+The customer encountered the following errors:+
{noformat}
./cluvfy stage -pre crsinst -n detrac1,detrac2 -verbose
.....
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) failed
{noformat}
+NTP:+
{noformat}
# ntpq -p
remote refid st t when poll reach delay offset disp
==============================================================================
* <REMOVED> LOCAL(0) <REMOVED>
#
{noformat}
Same on the both nodes.
+CVU log:+
{noformat}
[978@detrac1] [main] [ 2011-05-13 17:09:51.490 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac1 is =
remote refid st t when poll reach delay offset disp
==============================================================================
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac1 did NOT produce valid output.
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac2 is =
remote refid st t when poll reach delay offset disp
==============================================================================
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.493 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.494 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac2 did NOT produce valid output.
{noformat}
Ref: $CVU_HOME/cv/log/cvutrace.log.0
|
|
Change by ubTools Support - 13/May/11 05:32 PM
|
|
Description
|
+The customer encountered the following errors:+
{noformat}
./cluvfy stage -pre crsinst -n detrac1,detrac2 -verbose
.....
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) failed
{noformat}
+NTP:+
{noformat}
# ntpq -p
remote refid st t when poll reach delay offset disp
==============================================================================
* <REMOVED> LOCAL(0) <REMOVED>
#
{noformat}
Same on the both nodes.
+CVU log:+
{noformat}
[978@detrac1] [main] [ 2011-05-13 17:09:51.490 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac1 is =
remote refid st t when poll reach delay offset disp
==============================================================================
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac1 did NOT produce valid output.
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac2 is =
remote refid st t when poll reach delay offset disp
==============================================================================
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.493 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.494 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac2 did NOT produce valid output.
{noformat}
Ref: $CVU_HOME/cv/log/cvutrace.log.0
|
+Errors:+
The customer encountered the following errors in CVU:
{noformat}
./cluvfy stage -pre crsinst -n detrac1,detrac2 -verbose
.....
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) failed
{noformat}
+NTP:+
{noformat}
# ntpq -p
remote refid st t when poll reach delay offset disp
==============================================================================
* <REMOVED> LOCAL(0) <REMOVED>
#
{noformat}
Same on the both nodes.
+CVU log:+
{noformat}
[978@detrac1] [main] [ 2011-05-13 17:09:51.490 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac1 is =
remote refid st t when poll reach delay offset disp
==============================================================================
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac1 did NOT produce valid output.
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac2 is =
remote refid st t when poll reach delay offset disp
==============================================================================
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.493 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.494 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac2 did NOT produce valid output.
{noformat}
Ref: $CVU_HOME/cv/log/cvutrace.log.0
|
|
Product Version
|
CVU:
|
CVU 11g
|
|
Change by ubTools Support - 13/May/11 05:48 PM
|
|
Description
|
+Errors:+
The customer encountered the following errors in CVU:
{noformat}
./cluvfy stage -pre crsinst -n detrac1,detrac2 -verbose
.....
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) failed
{noformat}
+NTP:+
{noformat}
# ntpq -p
remote refid st t when poll reach delay offset disp
==============================================================================
* <REMOVED> LOCAL(0) <REMOVED>
#
{noformat}
Same on the both nodes.
+CVU log:+
{noformat}
[978@detrac1] [main] [ 2011-05-13 17:09:51.490 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac1 is =
remote refid st t when poll reach delay offset disp
==============================================================================
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac1 did NOT produce valid output.
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac2 is =
remote refid st t when poll reach delay offset disp
==============================================================================
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.493 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.494 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac2 did NOT produce valid output.
{noformat}
Ref: $CVU_HOME/cv/log/cvutrace.log.0
|
+Errors:+
The customer encountered the following errors in CVU:
{noformat}
./cluvfy stage -pre crsinst -n detrac1,detrac2 -verbose
.....
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) failed
{noformat}
+NTP:+
{noformat}
# ntpq -p
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
#
{noformat}
Same on the both nodes.
+CVU log:+
{noformat}
[978@detrac1] [main] [ 2011-05-13 17:09:51.490 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac1 is =
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac1 did NOT produce valid output.
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac2 is =
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.493 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.494 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac2 did NOT produce valid output.
{noformat}
Ref: $CVU_HOME/cv/log/cvutrace.log.0
|
|
Change by ubTools Support - 13/May/11 05:59 PM
|
|
Description
|
+Errors:+
The customer encountered the following errors in CVU:
{noformat}
./cluvfy stage -pre crsinst -n detrac1,detrac2 -verbose
.....
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) failed
{noformat}
+NTP:+
{noformat}
# ntpq -p
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
#
{noformat}
Same on the both nodes.
+CVU log:+
{noformat}
[978@detrac1] [main] [ 2011-05-13 17:09:51.490 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac1 is =
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac1 did NOT produce valid output.
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac2 is =
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.493 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.494 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac2 did NOT produce valid output.
{noformat}
Ref: $CVU_HOME/cv/log/cvutrace.log.0
|
+Errors:+
The customer encountered the following errors in CVU:
{noformat}
./cluvfy stage -pre crsinst -n detrac1,detrac2 -verbose
.....
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) failed
.....
{noformat}
+NTP:+
{noformat}
# ntpq -p
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
#
{noformat}
Same on the both nodes.
+CVU log:+
{noformat}
[978@detrac1] [main] [ 2011-05-13 17:09:51.490 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac1 is =
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac1 did NOT produce valid output.
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac2 is =
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.493 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.494 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac2 did NOT produce valid output.
{noformat}
Ref: $CVU_HOME/cv/log/cvutrace.log.0
|
|
Change by ubTools Support - 13/May/11 06:00 PM
|
|
Description
|
+Errors:+
The customer encountered the following errors in CVU:
{noformat}
./cluvfy stage -pre crsinst -n detrac1,detrac2 -verbose
.....
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) failed
.....
{noformat}
+NTP:+
{noformat}
# ntpq -p
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
#
{noformat}
Same on the both nodes.
+CVU log:+
{noformat}
[978@detrac1] [main] [ 2011-05-13 17:09:51.490 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac1 is =
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac1 did NOT produce valid output.
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac2 is =
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.493 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.494 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac2 did NOT produce valid output.
{noformat}
Ref: $CVU_HOME/cv/log/cvutrace.log.0
|
+Errors:+
The customer encountered the following errors in CVU:
{noformat}
./cluvfy stage -pre crsinst -n detrac1,detrac2 -verbose
.....
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) failed
.....
{noformat}
+NTP:+
{noformat}
# ntpq -p
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
#
{noformat}
Same on the both nodes.
+CVU log:+
{noformat}
.....
[978@detrac1] [main] [ 2011-05-13 17:09:51.490 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac1 is =
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac1 did NOT produce valid output.
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac2 is =
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.493 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.494 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac2 did NOT produce valid output.
.....
{noformat}
Ref: $CVU_HOME/cv/log/cvutrace.log.0
|
|
Change by ubTools Support - 13/May/11 06:02 PM
|
|
Description
|
+Errors:+
The customer encountered the following errors in CVU:
{noformat}
./cluvfy stage -pre crsinst -n detrac1,detrac2 -verbose
.....
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) failed
.....
{noformat}
+NTP:+
{noformat}
# ntpq -p
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
#
{noformat}
Same on the both nodes.
+CVU log:+
{noformat}
.....
[978@detrac1] [main] [ 2011-05-13 17:09:51.490 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac1 is =
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac1 did NOT produce valid output.
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac2 is =
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.493 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.494 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac2 did NOT produce valid output.
.....
{noformat}
Ref: $CVU_HOME/cv/log/cvutrace.log.0
|
+Errors:+
The customer encountered the following errors in CVU:
{noformat}
./cluvfy stage -pre crsinst -n detrac1,detrac2 -verbose
.....
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) failed
.....
{noformat}
+NTP:+
{noformat}
# ntpq -p
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
#
{noformat}
Same on both nodes.
+CVU log:+
{noformat}
.....
[978@detrac1] [main] [ 2011-05-13 17:09:51.490 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac1 is =
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac1 did NOT produce valid output.
[978@detrac1] [main] [ 2011-05-13 17:09:51.492 EEST ] [TaskNTP.getTimeServerInfo:838] Output from NTP query command on node detrac2 is =
remote refid st t when poll reach delay offset disp
==============================================================================
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.493 EEST ] [TaskNTP.getTimeServerInfo:864] Parsing of NTP query output line FAILED. Line=
*<REMOVED> LOCAL(0) <REMOVED>
[978@detrac1] [main] [ 2011-05-13 17:09:51.494 EEST ] [TaskNTP.getTimeServerInfo:880] NTP query on node detrac2 did NOT produce valid output.
.....
{noformat}
Ref: $CVU_HOME/cv/log/cvutrace.log.0
|
|
Change by ubTools Support - 13/May/11 06:04 PM
|
|
Status
|
Open
[ 1
]
|
Closed
[ 6
]
|
|
Resolution
|
|
Answered
[ 10
]
|
|
Change by ubTools Support - 13/May/11 06:07 PM
|
|
Resolution
|
Answered
[ 10
]
|
|
|
Status
|
Closed
[ 6
]
|
Reopened
[ 4
]
|
|
Change by ubTools Support - 13/May/11 06:07 PM
|
|
Status
|
Reopened
[ 4
]
|
Closed
[ 6
]
|
|
Resolution
|
|
Answered
[ 10
]
|
Oracle - Operating System
Closed
Major
PRVF-5410 : Check of common NTP Time Server failed, PRVF-5416 : Query of NTP daemon failed on all nodes